OPAKE BLOCKOUT WHITE
100% BLOCK OUT OPACITY
Description
Opake White has 100% block out opacity so both sides can be printed. It is an ideal replacement for PVC. Outdoor use, guaranteed for one year.
Features
- Higher area yield than PVC
- Balanced tensile and elongation
- Flexible yet tough
- No plasticizers or toxic materials
- 100% recyclable
- Film thickness can be supplied between 8 – 20 mils
Applications
- Two side printable for banners, posters, decals and tags.
- Great tear and puncture resistance where grommets can be applied
- Product can be sewn
General Data
| Typical Values | Units | Thickness | Thickness | Thickness | Test Method |
|---|---|---|---|---|---|
| Thickness | mils | 8.0 | 9.0 | 13.0 | Trico |
| Area Yield | in²/lb | 3,342 | 2,970 | 2,056 | Trico |
| Opacity (Block Out) | % | >100 | >100 | >100 | ASTM D1003 |
| Gloss 60 Degree | Inside | 26 | 26 | 26 | Garden Meter |
| Outside | 32 | 32 | 32 | Garden Meter | |
| Tensile Strength @ Break (PSI) | MD | 3,100 | 3,100 | 3,100 | ASTM D882 |
| TD | 2,900 | 2,900 | 2,900 | ASTM D882 | |
| Elongation @ Break (%) | MD | >400 | >400 | >400 | ASTM D882 |
| TD | >400 | >400 | >400 | ASTM D822 | |
| Heat Shrinkage @ 212F (10 min) | % | Nil | Nil | Nil | Trico |
| Corona Treatment | Dynes | 46 | 46 | 46 | ASTM D2578 |
*Surface pits /gels: Small pin hole size pits or gels may be found and is representative of the manufacturing process. This will be more prevalent to see when a full flood coat of dark ink is applied. These small holes/gels should not be densely populated, but more so sporadic across the sheet.
Disclaimer: These values are typical performance data. We believe the information is the best currently available and is offered as a helpful determination for selecting TSF’s products. Trico Specialty Films makes no guaranties of results and assumes no liability with correctness of this information.