PR CLEAR MATTE
Special Print Package – Oriented-Polyolefin Film
Description
PR Clear Matte films are designed with a lower gloss higher haze surface. A special print additive package is provided for your difficult to print applications. Consistent matte surface with excellent lay flat roll conditions.
Features
- Clear matte surface
- Soft conformable
- Corona Treated both sides with superior ink retention for solvent, water and the most difficult UV ink systems
- Excellent die cutting
- Low shrinkage
- High heat stabilized mono-layer; no layers to separate
- Controlled MD – TD tensile and elongation
*Top coating may not be necessary. Trico can provide testing for your ink systems.
Application
- Packaging
- Pouches
- A variety of Label applications including squeezable bottle and tube labeling
- Can be used as a lamination film
General Data
| Typical Values | Units | Test Method | ||
|---|---|---|---|---|
| Thickness | mils | 2.35 | 2.5 | Trico |
| Area Yield | in²/lb | 12,979 | 12,200 | Trico |
| Haze | % | 55 | 55 | ASTM D1003 |
| Gloss | Degree | 50 | 45 | Garden Meter |
| Tensile Strength @ Break (PSI) | MD | 21,000 | 21,000 | ASTM D882 |
| TD | 2,900 | 2,900 | ASTM D882 | |
| Elongation @ Break (%) | MD | 125 | 125 | ASTM D882 |
| TD | 600 | 600 | ASTM D882 | |
| Heat Shrinkage @ 212F (10 min) | % | < 3 | < 3 | Trico |
| Stiffness (Grams) | MD | 14 | 16 | Handle-O-Meter |
| TD | 10 | 12 | Handle-O-Meter | |
| Corona Treatment | Dynes | 46 | 46 | ASTM D2578 |
Upon request, other gauges can be supplied from 1.2 – 8 mils. Modification to the above values can be made depending on the end use of the film structure.
Note: These values are typical performance data. We believe the information is the best currently available and is offered as a helpful determination for selecting TSF’s products. Trico Specialty Films, LLC makes no guaranties of results and assumes no liability with correctness of this information.