Biaxial-Oriented Polyolefin Film

Description

TREAX TX-G films are single layer, non-sealable BOPP film.  This film is designed to have very low haze.  Standard film design is untreated; however, flame or corona treatment is available on the A side and corona treatment is available on B side.

Features

  • Optically Clear, Low Haze
  • Printable
  • Gloss/Gloss Appearance
  • Resistance to oil, grease, and many chemicals
  • For use with hot-melt, water, UV, and solvents

Applications

  • Paper/Board Laminations
  • Tape/Labels
  • Cable Wrap
  • Flexible Laminations
  • Over Laminations
  • Print applications

General Data

Typical ValuesUnitsThicknessTest Method
Thicknessmils1.0
Trico
Normal Yieldin²/lb30,600Trico
Haze%2.0ASTM D1003
Tensile Strength @ Break (PSI) MD18,000ASTM D882
TD45,000ASTM D882
Tensile Strength @ Break (PLI) MD27.0ASTM D882
TD37.8ASTM D882
Elongation @ Break (%)MD170ASTM D882
TD40ASTM D822
Heat Shrinkage @ 212F (10 min)MD3.0Trico
TD1.0
ASTM D822
Electrostatic TreatmentDynes38 - 48ASTM D2578
Note: These values are typical performance data. We believe the information is the best currently available and is offered as a helpful determination for selecting TSF’s products. Trico Specialty Films, LLC makes no guaranties of results and assumes no liability with correctness of this information.